RFSET-SDWK-F1
RFSET-SDWK-F1RFSET-SDWK-F1

RFSET-SDWK-F1

Switching actuator, dimming actuator, wall switch with 4 buttons, key-chain

Your price
97.30 €
Your price with tax
117.73 €
Original price
99.00 €
Discount
2% / 1.70 €
Availability
In stock
Order code
4194 standard
EAN
8595188138802



 

RFSET includes:

RFSA-61B | Wireless switch unit

 

  • The switching unit with 1 output channel is used to control appliances, lights (easy to integrate it to control garage doors or gates).
  •  They can be combined with detectors, controllers, iNELS RF Control or system components.
  • The BOX design lets you mount it right in an installation box, a ceiling or controlled appliance cover.
  • It enables connection of the switched load up to 16 A (4 000 W).
  • RFSA-61B: multi-function design – button, impulse relay and time function of delayed ON or OFF with time setting of 2 s-60 min.
  • The switching unit may be controlled by up to 25 channels (1 channel represents 1 button on the controller).
  • The programming button on the unit is also used for manual control of the output.
  • Memory status can be pre-set in the event of a power failure.
  • For components it is possible to set the repeater function via the RFAF / USB service device.
  • Range up to 200 m (in open space), if the signal is insuffi cient between the controller and unit, use the signal repeater RFRP-20 or protocol
    component RFIO2 that support this feature.
  • Communication frequency with bidirectional protocol iNELS RF Control2 (RFIO2).


RFDA-71B |  R-L-C dimmer

 

  • The halogen dimmer is used to regulate light sources:
    • R – classic lamps
    • L – halogen lamps with wound transformer
    • C – halogen lamps with electronic transformer
  • It can be combined with Controllers or System units iNELS RF Control.
  • The BOX design lets you mount it right in an installation box, a ceiling or light cover.
  • RFDA-71B: multi-function 6 light functions - smooth increase or decrease with time setting 2s-30 min.
  • When switched off , the set level is stored in the memory, and when switched back on, it returns to the most recently set value.
  • The built-in overcurrent protection switches off the dimmer upon surges or short circuits.
  • The halogen dimmer may be controlled by up to 32 channels (1 channel represents 1 button on the controller).
  • The programming button on the controller is also used for manual control of the output.
  • Range up to 160 m (in open space), if the signal is insuffi cient between the controller and unit, use the signal
  • repeater RFRP-20.
  • Communication frequency 868 MHz with bidirectional protocol iNELS RF Control.
  • You will fi nd more on light sources and dimming options at www.elkoep.com/solution


RFWB-40/G | Wireless wall controller 

 

  • The wireless controller is used to control switches and dimmers (lights, gate, garage door, blinds, etc.).
  • RFWB-40/G: four buttons enable control of four units independently.
  • The flat design with level base makes it ideal for fast installation on any surface (fi xation with adhesive or screws in the installation box).
  • When pressing the button, it sends a set signal (ON/OFF, dimming, time switching OFF / ON, blinds up/down).
  • Sending a command is indicated by a red LED.
  • In LOGUS90 switch frame design (plastic, glass, wood, metal, stone).
  • Option of setting light scenes, where with a single press, you can control units of iNELS RF Control.
  • Battery power supply (3 V / CR2032 - included in the supply) with battery life of around 5 years based on frequency of use.
  • Range up to 200 m (in open space), if the signal is insuffi cient between the controller and unit, use the signal repeater RFRP-20 or protocol component RFIO2 that support this feature.
  • Communication frequency with bidirectional protocol iNELS RF Control.

 

RF KEY | 4 button controller - keychain

 

  • The key alarm is used to control switches and dimmers (lights, gate, garage door, blinds, etc.).
  • When pressing the button, it sends a set signal (ON/OFF, dimming, time switching OFF / ON, blinds up/down).
  • Sending a command is indicated by a red LED.
  • Designed in black and white with laser printing.
  • Four buttons enable control of four units independently.
  • Option of setting light scenes, where with a single press, you can control units of iNELS RF Control.
  • Battery power supply (3 V / CR2032 - included in the supply) with battery life of around 5 years based on frequency of use.
  • Range up to 200 m (in open space), if the signal is insuffi cient between the controller and unit, use the signal repeater RFRP-20 or protocol component RFIO2  that support this feature.
  • Communication frequency with bidirectional protocol iNELS RF Control.
Documents in current location:
  • No documents
Documents in current location:
  • No documents

ELKO EP, s.r.o., Holešov

We develop, manufacture and deliver complete solutions for your electrical wiring. Czech company with more than 23-year tradition is a brand iNELS Smart Home Solution. One of the most comprehensive solutions on the market brings together wireless solutions and intelligent bus wiring. With this system you control heating, air conditioning, lighting and everything is perfectly secure. We are here for you from design to implementation and configure the system, thanks to our team of trained experts and partners.

Copyright © ABRA ESHOP 2015 | Contact | Business conditions | www.elkoep.com | www.inels.com | Downloads | About us