RFSET-SK-F1

RFSET includes:

RFSA-61B | Switching unit (6 functions,1 output)

• The switching unit with 1 output channel is used to control appliances, lights (easy to integrate it to control garage doors or gates).
• They can be combined with detectors, controllers, iNELS RF Control or system components.
• The BOX design lets you mount it right in an installation box, a ceiling or controlled appliance cover.
• It enables connection of the switched load up to 16 A (4 000 W).
• RFSA-61B: multi-function design – button, impulse relay and time function of delayed ON or OFF with time setting of 2 s-60 min.
• The switching unit may be controlled by up to 25 channels (1 channel represents 1 button on the controller).
• The programming button on the unit is also used for manual control of the output.
• Memory status can be pre-set in the event of a power failure.
• For components it is possible to set the repeater function via the RFAF / USB service device.
• Range up to 200 m (in open space), if the signal is insufficient between the controller and unit, use the signal repeater RFRP-20 or protocol component RFIO2 that support this feature.
• Communication frequency with bidirectional protocol iNELS RF Control² (RFIO²).

RF KEY | 4 button controller - black keychain

• The key alarm is used to control switches and dimmers (lights, gate, garage door, blinds, etc.).
• When pressing the button, it sends a set signal (ON/OFF, dimming, time switching OFF / ON, blinds up/down).
• Sending a command is indicated by a red LED.
• Designed in black and white with laser printing.
• Four buttons enable control of four units independently.
• The option of setting light scenes, where with a single press, you can control units of iNELS RF Control.
• Battery power supply (3 V / CR2032 - included in the supply) with a battery life of around 5 years based on the frequency of use.
• Range up to 200 m (in open space), if the signal is insufficient between the controller and unit, use the signal repeater RFRP-20 or protocol component RFIO2 that support this feature.
• Communication frequency with bidirectional protocol iNELS RF Control.